Polygel Vona is a low-temperature, fine-grained acrylic gel. It can be used for modeling, repairing, or strengthening the nail plate. It is convenient to work with both lower and upper forms. The material is hard, plastic when applied, and thick in consistency. It holds the arch well. It is easy to file with a nail file or cutter. It is perfect for French manicures.


Application method
1. Nail preparation
 
 
Remove the previous coating.
 
 
Carefully treat the cuticle, lightly buff the surface, and shape the nails.
 
 
Degrease and disinfect the nail plate.
 
 
If necessary, use a dehydrator and ultra bond.

2. Base coat
 
 
Apply a thin layer of clear base coat with rubbing motions.
 
 
Dry for 60 seconds.
 
 
Remove the sticky layer for more comfortable application of the polygel.

3. Application
 
 
Take the material with a spatula and transfer it to the form or nail.
 
 
Using a moistened brush, carefully distribute the material, forming the architecture.
 
 
It is recommended to perform a rough layout with an orange stick.
 
 
The material is static, so you can work on several nails at once.
 
 
For a French manicure, spread the material with a brush, smoothing out the lines.
 
 
Curing: LED lamp (36–48 W) — 60–90 seconds, UV lamp — 2–3 minutes.
 
 
When extending with upper forms, press the form and fix the arch for 8–12 seconds.

4. Filing and finishing
 
 
Remove the sticky layer.
 
 
Give the final shape with a file or cutter.
 
 
If reinforcement was performed, be sure to file at least 1 mm of the natural nail from the inside to avoid delamination.

5. Top coat
 
 
Apply a thin layer of top coat.
 
 
Cure in an LED lamp for 90–120 seconds or in a UV lamp for the maximum time according to the timer.
 
 
After curing, do not wipe the top coat to preserve the shine.

6. Final care
 
 
Apply cuticle oil.



Important information:
 
 
Shelf life: 24 months.
 
 
Once opened, store for no more than 18 months.
 
 
Easy to remove with a machine or gel polish remover.
 
 
The product photo on the website may differ slightly from the actual product.